Document roll with fixed cover
Weatherproof document roll with fixed cover – organization & protection for shipping papers
The fixed cover document roll from ROWEKO provides a reliable and weather-resistant solution for storing shipping papers and other important documents in commercial vehicles. Made from durable black HD-PE, it is available in various diameters (Ø 75 mm, Ø 90 mm, Ø 125 mm). The lid is attached to the flange with a stainless steel hinge and is secured by a standard lockable cylinder latch; two keys are included. Thanks to its smart design with no internal weld seams, even individual documents can be easily removed. Compatible accessories such as mounting clamps, brackets, and pipe clips enable flexible installation in the vehicle.
Document roll with fixed cover with hinges with Ø 75 und 90 mm
Size:
Tube: Ø 75 x 1,9 x 330 mm*
Lid: Ø 100 mm
Tube: Ø 90 x 2,2 x 330 mm*
Lid: Ø 120 mm
*plus additional components (cover and end piece) totaling 15 mm
Material:
HD-PE black
Execution:
The flange and end cap are welded to the tube. The lid is riveted to the flange with a VA hinge and is locked with a wing knob (standard).
1 key is included.
| Article | Weight (kg) |
| Document roll Ø 75 mm | |
| with wing knob | 0,28 |
| with gag (without key) | 0,28 |
| Document roll Ø 90 mm | |
| with wing knob | 0,40 |
| with gag (without key) | 0,40 |
Document roll with fixed cover with hinges (PDF)General catalogue (PDF)
Document roll with fixed cover with hinges with Ø 125 mm
Size:
Tube: Ø 125 x 3,1 x 330 mm*
Lid: 150 x 150 x 35 mm
Mounting of console to tube:
x = 130 mm, y = 200 mm
*plus additional components (cover and end piece) totaling 15 mm
Material:
HD-PE black
Execution:
The flange and end cap are welded to the tube. The lid is riveted to the flange with a VA hinge and is locked with a wing knob (standard).
2 keys are included.
| Article | Weight (kg) |
| Document roll Ø 125 mm | |
| with wing knob | 0,79 |
| with gag (without key) | 0,79 |
Document roll with fixed cover with hinges (PDF)General catalogue (PDF)
Fastening clip for document roll
Matching fastening clips can be supplied for all document rolls. 2 are needed for each document roll.
| Article | Weight (kg) |
| Fastening clip for document roll 2- part, galvanised steel with welded on nut. | |
| Tube-Ø 75 mm | 0,11 |
| Tube-Ø 90 mm | 0,11 |
| Tube-Ø 125 mm | 0,18 |
Fastening console
2-part, black HD-PE. If you order the console at the same time, it is automatically welded onto the document roll (hinge catch right, see image). Other mounts are available.
Tube clip
For light contents, a pipe clamp made of robust HDPE plastic is usually sufficient. The pipe clamp can be placed variably.
Executions:
Tube clip for tube-Ø 125 mm: single/double
