Quality ensures sustainability
Retrofitting instead of sorting out, repairing instead of throwing away - that is the philosophy behind the excellent product quality of Roweko commercial vehicle parts. Due to the large number of suitable equipment elements and spare parts, Roweko products can be completely renewed again and again. Key lost? No problem, we will provide you with a new matching locking system, hinge worn out? We will be happy to provide you with a suitable one for your product. This is how our commercial vehicle parts last the life of the vehicle and often far beyond.
Locks and keys
We supply the right locking system for every purpose. The standard locking system used in all ROWEKO products is the security lock with double bit. Needless to say, we can also use other locks, such as the square lock or cylinder lock.
Chapter (PDF)General catalogue (PDF)
The security lock with double bit: three advantages
- Vibration-proof: the bolt engages in closed state to rule out unintentional opening of the cover.
- In open state, the key stays in the lock and acts as handle. This also makes it apparent if you forget to lock the cover.
- Locking entails pressing the key to lift the bolt over the slot in the enclosure. This ensures that the bolt actually engages in the closing angle.
Therefore always remember: first press, then turn!
Wing knob / Wing knob (small)
Wing knob
Execution:
Vibration-proof when locked. The key can also be removed when the lock is open.
Scope of supply:
- Flank guide for 3-point lock, steel (L = 45 mm) galvanised, not mounted
- 2 keys, counter nut
Wing knob (small)
Execution:
Gag for locking and closing of:
- Document boxes
- Document rolls
Scope of supply:
- 1 key, counter nut
- Steel guide (L = 24 mm) galvanised, mounted
Wing knob
Wing knob (small)
3-point lock for toolboxes
Scope of supply:
Comprising 2 rods (galvanised steel) with rolls, 2 guide rods (PA) with screw (V2A) and flank guide (zink die) without lock / turning, not mounted.
Caution:
- Please state toolbox type and yoar of manufacture!
- Please oder lock / turning bolt separately
Swing lever, BURG WÄCHTER Padlock and T-handle
Swing lever
Swing lever for 3-point locking on coupling cabinet up to year of manufacture 09/2009.
Scope of supply:
- 3 keys, mounting plate, without latch
BURG WÄCHTER Padlock
Brass body with plastic shell, lock made from stainless steel, 2 keys for toolboxes with:
- Circlip lock
- Snap lock
Scope of supply:
- 2 keys
T-handle
Vibration-proof when locked. The key can also be removed when the lock is open.
Scope of supply:
- 2 keys, counternut
- Without latch
Swing lever
BURG WÄCHTER Padlock
T-handle
Lock cover, Lock protection and dust cap
Material:
PE / Santoprene, black and stainless steel
Execution:
- Lock cover (Ø 38 mm and Ø 65 mm) for lids on toolboxes and storage boxes, protects the lock from the elements.
- Lock protection prevents the locking cylinder from being over-stressed
- Dust cap for clipping onto tube containers, protects the lock from the elements.
Lock protection
Lock cover
Dust cap
Angle for Padlock, locking split pin and hinges
Material:
Stainless steel / Steel galvanised (locking split pin)
Execution:
- Angle for padlock for snap lock + circlip lock and storage boxes with removable lid, drill hole 9.0 mm
- Locking split pin for toolboxes, storage boxes and platform boxes with snap lock or circlip lock
- Hinges for the mounting of flanges + doors/lids for tube containers, toolboxes, fire extinguisher boxes, document boxes etc.
Dimensions hinges:
- 75 x 40 mm
- 40 x 32 mm
Angle for padlock
Locking split pin
Hinges
