ROWEKO Kunststoffverarbeitung
  • MENU
  • Parts for Commercial Vehicles
  • Products
  • Individual parts
  • Company
  • Contact
  • Hose tube containers
    • Silo vehicles
    • Tanker vehicles
    • Transportation tube for roof rack
  • Load-securing
    • Patrol cans and gas bottles
    • Transportation tube for roof rack
    • Belt retractor
    • Belt tray
  • Toolboxes
  • Platform boxes
  • Storage boxes
  • Special parts for silo vehicles
  • Air Suction Channels
  • Fire extinguisher box
  • Document box
  • Wheel chock
  • Wheel nut
  • Mudguards
  • Standard parts
  • Individual solutions
  • Installation instructions
  • Brochures as PDF
toolboxes

Toolboxes: all sizes at a glance

Standard toolbox

Whether mounted permanently to the vehicle or portable for use en route, Roweko toolboxes are convincing thanks to their lightweight design, high functionality and well thought-out concept.

  • Large choice of locks and closures
  • Up to 4 drawers ensure that the contents are kept in good order (accessories)
  • Flat-steel mountings make it easy to fasten the toolbox to the vehicle (accessory)

Request TÜV-ECE-R73 via e-mail

General catalogue PDF

Watch Video

  • Overview
    Typ Breite (width) mm Tiefe (depth) mm Höhe (height) mm PDF Download
    Typ 1 600 mm 500 mm 460 mm
    Typ 1-V 460 mm 500 mm 600 mm
    Typ 2 650 mm 600 mm 350 mm
    Typ 2-V 350 mm 600 mm 650 mm
    Typ 3 600 mm 450 mm 460 mm
    Typ 4 440 mm 440/600 mm 450/180 mm
    Typ 6 630 mm 600 mm 545 mm
    Typ 6-H 630 mm 600 mm 545 mm
    Typ 7 545 mm 600 mm 630 mm
    Typ 8 820 mm 600 mm 540 mm
    Typ 9 650 mm 610 mm 400 mm
    Typ 10 920 mm 470 mm 510 mm
    Typ 13 650 mm 330 mm 350 mm
    Typ 13-S 650 mm 290 mm 350 mm
    Typ 15 650 mm 440 mm 350 mm
    Typ 16 650 mm 430 mm 400 mm
    Typ 17 1200 mm 550 mm 630 mm
    Typ 18 480 mm 400 mm 440 mm
    Typ 18-V 440 mm 410 mm 480 mm
    Typ 20 720 mm 280 mm 310 mm
    Typ 28 845 mm 340 mm 465 mm
    Typ 29 560 mm 360 mm 430 mm
  • Accessories
    Drawers
    detachable chain catches
    • Up to 4 drawers can be used, depending on the toolbox size.
    • Additional detachable chain catches can be fitted to the left and right of the cover to prevent it from opening by more than 90°.
    • This also makes it possible to fasten the base plate of the belt retractor to the cover of the tool box.
  • Mountings
    Mountings

    The galvanized-reinforced flat steel mountings are bent from one single sheet that matches the box in question. The mounting fully encloses the box. The front and rear clamps only need to be affixed with screws in the premarked holes on the box. All parts required for the mounting are included to allow for a quick assembly.

  • Locking systems
    2-point locking
    2-point locking

    Simple and proven locking mechanism.

    The locking bolts of the two identical locks grip the back of an aluminium rail. An additional stainless steel stamping prevents the locking cylinder from being overstressed. Protective covers made from black PE protect the locks from the elements. 2 keys included in the delivery.

    3-point locking
    3-point locking

    User-friendly locking mechanism.

    The toolbox is locked via a central lock with guide-bars, which simultaneously grip an aluminium rail mounted on three sides.Solid holders operate the guide-bars. The new, enlarged lock cover protects the lock from the elements, and the wing knob from being opened by vibrations. Integrated recessed grips make it easier to open and close the cover. 1 key is included in the delivery.

    Circlip lock
    Circlip lock

    Individual locking facility.

    A plastic (HD-PE) mould serves as the lock. This hoop is secured to the box with VA hinges. The hoop fits over the closed cover and locks. A spring-pin is included. If required, a padlock (available as an accessory) can also be used. Integrated recessed grips make it easier to open and close the cover.

    Snap lock
    Snap lock

    Economy closure.

    A HD-PE profile, secured on the cover with VA rivets, provides a snap-fit over the projecting rim of the toolbox. The spring-pin (included) provides additional security. A padlock (available as an accessory) prevents unauthorised access. For technical reasons this economical alternative is only suitable for use with certain types of toolboxes.

  • Quality
    Well thought-out right down to the very last detail
    type approval data

    For your safety: all necessary type approval data for using the toolbox as under-ride side guards are correctly embossed in the cover.

    Integrated recessed grips

    Integrated recessed grips make it easier to open and close the toolbox. (Not for all locks and closures)

    Interior

    The interior of the Roweko toolbox is always completely accessible. Drawers can be used for individual partitioning. It can be easily cleaned with a steam-jet cleaner. The cleaning agents can drain away unhindered as the structure is not undercut. It is thus impossible for pools of water to form which could cause damage during frosty conditions. All ROWEKO toolboxes have steel hinges so there is also no risk of frost causing damage to plastic hinges.

    rounded aluminium angles

    Another safety feature: rounded aluminium angles.
    All parts of a ROWEKO toolbox are available as spare parts.

    Mountings

    The plastic-reinforced flat steel mountings are bent from one single sheet that matches the box in question. The mounting fully encloses the box. The front and rear clamps only need to be affixed with screws in the premarked holes on the box. All parts required for the mounting are included to allow for a quick assembly.

    Hinges, rivets and washers

    Hinges, rivets and washers are made of stainless steel.
     Here there are no cracked plastic hinges caused by the weather or ageing processes.

  • Product advantages
    KeywordExplanation
    Under-ride side guards

    Since January 1994, all ROWEKO toolboxes have been type-approved by the Federal Motor Transport Authority (approval no. 90442). This permits their unrestricted use as under-ride side guards in accordance with EEC Directive 89/297. All the required tests have been carried out and certified under the supervision of the German technical inspection agency, south-western division (TÜV Südwest).Furthermore, all ROWEKO toolboxes meet the specifications in the international rule ECE-R73. All required information can be found on the cover in line with regulations.

    Water- tightness

    ROWEKO toolboxes are produced by vacuum moulding methold. Bodies and covers are moulded separately on two machines. The two parts are then shrunk to form a tight unit. For you, this means:

    • Splashproof without the need for an additional rubber seal
    • The use of only one type of plastic makes it easier to recycle
    • Ice and snow in wintertime will not cause the box and cover to become "glued together"
    Corrosion-resistant mounting parts

    ROWEKO uses only high-quality materials for mounting its toolboxes. Long life is guaranteed through:

    • Hinges and rivets made from corrosion-proof V2A steel
    • Aluminium push-fit brackets
    • Locks made of brass and zinc die (stainless steel available for additional fee)
    • Securing hoops and snap locks made from polyethylene (HD-PE)
    • Padlock shackles made of stainless V2A steel
    Weight

    The best possible volume-to-weight ratio is achieved by the use of the economical vacuum moulding method. In comparison to other production methods, great wall thicknesses are not required to achieve maximum stability. And maximum stability is achieved; it is certified by the German technical inspection agency

    Lock cover

    ROWEKO ensures a long life with its specially designed lock cover featuring:

    • UV-resistant material
    • Secure fastening through tight fit
    • High stability of the mounting aperture
    • Long-lasting flexibility through integral hinges
    Storage space

    The entire interior capacity of ROWEKO toolboxes can be utilised as storage space. Drawers and inserts allow the space to be subdivided to suit individual requirements, as well as keeping order and giving the user an overview of the box contents. The wide range of types available means that there is a toolbox to suit every type of truck. 

    CleaningThe interior of ROWEKO toolboxes can be easily cleaned with a steam blaster, as the complete drainage of cleaning agents is guaranteed. Lashing straps and tools remain out of the water and functional. Thus no pools of water form, which can cause to hinges breaking when there is a frost.
    MountsThe flat steel mounts (in stronger material) are bent from a sheet that matches the box in question. The mount fully encapsulates the box. The front and rear clamps only need to be affixed with screws in the premarked holes on the box. All parts required for the mount are included to allow for a quick assembly
    Comfort
    • Integrated recessed grips make it easier to open and close the cover (not available with all types of locks)
    • Safely rounded aluminium closing angles
    • Wing knob
    • Your company logo can be easily incorporated onto the cover, thus the toolbox also functions as an effective marketing tool.
    • All of our products are "Made in Germany", meaning that all components are subjected to a comprehensive spare part guarantee.
  • Spare parts
    • Body
    • Cover
    • Hinge
    • Aluminium closing angle
    • Locks
    • Keys
    • Safety cap
    • Rivets
    • Mountings
    Spare parts

    All product components are also available separately as individual or spare parts. For unequivocal identification of the required part, we only need the production date together with the type name and locking system. 

Zu den Pritschenkästen
Zu den Normteilen
Zu den Spanngurtaufrollern
Zu den Dokumentenbehältern
Zu den Luftfiltergehäusen als individuelle Lösungen
Zu den Schlauchrohrbehältern für Silofahrzeuge
Zu den Dokumentenbehältern für Nutzfahrzeuge
Zu den Schlauchrohrbehältern
Zu den Silo-Schlauchrohrbehältern
Zu den Stauboxen
Kontakt
Industriegebiet „Vorderes Burgfeld“
Hoher Steg 5, D-74348 Lauffen a. N.

Tel. +49 7133 228808-0
Fax +49 7133 228808-44

info@roweko.de
www.roweko.de


Impressum
Datenschutz
Parts for Commercial Vehicles
Hose tube containersLoad-securingToolboxesPlatform boxesStorage boxesSpecial parts for silo vehiclesAir Suction ChannelsFire extinguisher boxDocument boxWheel chockWheel nutMudguardsStandard partsIndividual solutionsInstallation instructionsBrochures as PDF
Products
Small siloRobotic lawnmower garage
Individual parts
DesignSample inspectionToolmakingPlasticsProductionLogisticsExamples
Company
About usHistoryLocationGTCSales terms and delivery conditions
ROWEKO Kunststoffverarbeitung
  • Hose tube containers
    • Silo vehicles
    • Tanker vehicles
    • Transportation tube for roof rack
  • Load-securing
    • Patrol cans and gas bottles
    • Transportation tube for roof rack
    • Belt retractor
    • Belt tray
  • Toolboxes
  • Platform boxes
  • Storage boxes
  • Special parts for silo vehicles
  • Air Suction Channels
  • Fire extinguisher box
  • Document box
  • Wheel chock
  • Wheel nut
  • Mudguards
  • Standard parts
  • Individual solutions
  • Installation instructions
  • Brochures as PDF
toolboxes

Toolboxes: all sizes at a glance

Standard toolbox

Whether mounted permanently to the vehicle or portable for use en route, Roweko toolboxes are convincing thanks to their lightweight design, high functionality and well thought-out concept.

  • Large choice of locks and closures
  • Up to 4 drawers ensure that the contents are kept in good order (accessories)
  • Flat-steel mountings make it easy to fasten the toolbox to the vehicle (accessory)

Request TÜV-ECE-R73 via e-mail

General catalogue PDF

Watch Video

  • Overview
    Typ Breite (width) mm Tiefe (depth) mm Höhe (height) mm PDF Download
    Typ 1 600 mm 500 mm 460 mm
    Typ 1-V 460 mm 500 mm 600 mm
    Typ 2 650 mm 600 mm 350 mm
    Typ 2-V 350 mm 600 mm 650 mm
    Typ 3 600 mm 450 mm 460 mm
    Typ 4 440 mm 440/600 mm 450/180 mm
    Typ 6 630 mm 600 mm 545 mm
    Typ 6-H 630 mm 600 mm 545 mm
    Typ 7 545 mm 600 mm 630 mm
    Typ 8 820 mm 600 mm 540 mm
    Typ 9 650 mm 610 mm 400 mm
    Typ 10 920 mm 470 mm 510 mm
    Typ 13 650 mm 330 mm 350 mm
    Typ 13-S 650 mm 290 mm 350 mm
    Typ 15 650 mm 440 mm 350 mm
    Typ 16 650 mm 430 mm 400 mm
    Typ 17 1200 mm 550 mm 630 mm
    Typ 18 480 mm 400 mm 440 mm
    Typ 18-V 440 mm 410 mm 480 mm
    Typ 20 720 mm 280 mm 310 mm
    Typ 28 845 mm 340 mm 465 mm
    Typ 29 560 mm 360 mm 430 mm
  • Accessories
    Drawers
    detachable chain catches
    • Up to 4 drawers can be used, depending on the toolbox size.
    • Additional detachable chain catches can be fitted to the left and right of the cover to prevent it from opening by more than 90°.
    • This also makes it possible to fasten the base plate of the belt retractor to the cover of the tool box.
  • Mountings
    Mountings

    The galvanized-reinforced flat steel mountings are bent from one single sheet that matches the box in question. The mounting fully encloses the box. The front and rear clamps only need to be affixed with screws in the premarked holes on the box. All parts required for the mounting are included to allow for a quick assembly.

  • Locking systems
    2-point locking
    2-point locking

    Simple and proven locking mechanism.

    The locking bolts of the two identical locks grip the back of an aluminium rail. An additional stainless steel stamping prevents the locking cylinder from being overstressed. Protective covers made from black PE protect the locks from the elements. 2 keys included in the delivery.

    3-point locking
    3-point locking

    User-friendly locking mechanism.

    The toolbox is locked via a central lock with guide-bars, which simultaneously grip an aluminium rail mounted on three sides.Solid holders operate the guide-bars. The new, enlarged lock cover protects the lock from the elements, and the wing knob from being opened by vibrations. Integrated recessed grips make it easier to open and close the cover. 1 key is included in the delivery.

    Circlip lock
    Circlip lock

    Individual locking facility.

    A plastic (HD-PE) mould serves as the lock. This hoop is secured to the box with VA hinges. The hoop fits over the closed cover and locks. A spring-pin is included. If required, a padlock (available as an accessory) can also be used. Integrated recessed grips make it easier to open and close the cover.

    Snap lock
    Snap lock

    Economy closure.

    A HD-PE profile, secured on the cover with VA rivets, provides a snap-fit over the projecting rim of the toolbox. The spring-pin (included) provides additional security. A padlock (available as an accessory) prevents unauthorised access. For technical reasons this economical alternative is only suitable for use with certain types of toolboxes.

  • Quality
    Well thought-out right down to the very last detail
    type approval data

    For your safety: all necessary type approval data for using the toolbox as under-ride side guards are correctly embossed in the cover.

    Integrated recessed grips

    Integrated recessed grips make it easier to open and close the toolbox. (Not for all locks and closures)

    Interior

    The interior of the Roweko toolbox is always completely accessible. Drawers can be used for individual partitioning. It can be easily cleaned with a steam-jet cleaner. The cleaning agents can drain away unhindered as the structure is not undercut. It is thus impossible for pools of water to form which could cause damage during frosty conditions. All ROWEKO toolboxes have steel hinges so there is also no risk of frost causing damage to plastic hinges.

    rounded aluminium angles

    Another safety feature: rounded aluminium angles.
    All parts of a ROWEKO toolbox are available as spare parts.

    Mountings

    The plastic-reinforced flat steel mountings are bent from one single sheet that matches the box in question. The mounting fully encloses the box. The front and rear clamps only need to be affixed with screws in the premarked holes on the box. All parts required for the mounting are included to allow for a quick assembly.

    Hinges, rivets and washers

    Hinges, rivets and washers are made of stainless steel.
     Here there are no cracked plastic hinges caused by the weather or ageing processes.

  • Product advantages
    KeywordExplanation
    Under-ride side guards

    Since January 1994, all ROWEKO toolboxes have been type-approved by the Federal Motor Transport Authority (approval no. 90442). This permits their unrestricted use as under-ride side guards in accordance with EEC Directive 89/297. All the required tests have been carried out and certified under the supervision of the German technical inspection agency, south-western division (TÜV Südwest).Furthermore, all ROWEKO toolboxes meet the specifications in the international rule ECE-R73. All required information can be found on the cover in line with regulations.

    Water- tightness

    ROWEKO toolboxes are produced by vacuum moulding methold. Bodies and covers are moulded separately on two machines. The two parts are then shrunk to form a tight unit. For you, this means:

    • Splashproof without the need for an additional rubber seal
    • The use of only one type of plastic makes it easier to recycle
    • Ice and snow in wintertime will not cause the box and cover to become "glued together"
    Corrosion-resistant mounting parts

    ROWEKO uses only high-quality materials for mounting its toolboxes. Long life is guaranteed through:

    • Hinges and rivets made from corrosion-proof V2A steel
    • Aluminium push-fit brackets
    • Locks made of brass and zinc die (stainless steel available for additional fee)
    • Securing hoops and snap locks made from polyethylene (HD-PE)
    • Padlock shackles made of stainless V2A steel
    Weight

    The best possible volume-to-weight ratio is achieved by the use of the economical vacuum moulding method. In comparison to other production methods, great wall thicknesses are not required to achieve maximum stability. And maximum stability is achieved; it is certified by the German technical inspection agency

    Lock cover

    ROWEKO ensures a long life with its specially designed lock cover featuring:

    • UV-resistant material
    • Secure fastening through tight fit
    • High stability of the mounting aperture
    • Long-lasting flexibility through integral hinges
    Storage space

    The entire interior capacity of ROWEKO toolboxes can be utilised as storage space. Drawers and inserts allow the space to be subdivided to suit individual requirements, as well as keeping order and giving the user an overview of the box contents. The wide range of types available means that there is a toolbox to suit every type of truck. 

    CleaningThe interior of ROWEKO toolboxes can be easily cleaned with a steam blaster, as the complete drainage of cleaning agents is guaranteed. Lashing straps and tools remain out of the water and functional. Thus no pools of water form, which can cause to hinges breaking when there is a frost.
    MountsThe flat steel mounts (in stronger material) are bent from a sheet that matches the box in question. The mount fully encapsulates the box. The front and rear clamps only need to be affixed with screws in the premarked holes on the box. All parts required for the mount are included to allow for a quick assembly
    Comfort
    • Integrated recessed grips make it easier to open and close the cover (not available with all types of locks)
    • Safely rounded aluminium closing angles
    • Wing knob
    • Your company logo can be easily incorporated onto the cover, thus the toolbox also functions as an effective marketing tool.
    • All of our products are "Made in Germany", meaning that all components are subjected to a comprehensive spare part guarantee.
  • Spare parts
    • Body
    • Cover
    • Hinge
    • Aluminium closing angle
    • Locks
    • Keys
    • Safety cap
    • Rivets
    • Mountings
    Spare parts

    All product components are also available separately as individual or spare parts. For unequivocal identification of the required part, we only need the production date together with the type name and locking system. 

Kontakt
Industriegebiet „Vorderes Burgfeld“
Hoher Steg 5, D-74348 Lauffen a. N.

Tel. +49 7133 228808-0
Fax +49 7133 228808-44

info@roweko.de
www.roweko.de


Impressum
Datenschutz
Parts for Commercial Vehicles
Hose tube containersLoad-securingToolboxesPlatform boxesStorage boxesSpecial parts for silo vehiclesAir Suction ChannelsFire extinguisher boxDocument boxWheel chockWheel nutMudguardsStandard partsIndividual solutionsInstallation instructionsBrochures as PDF
Products
Small siloRobotic lawnmower garage
Individual parts
DesignSample inspectionToolmakingPlasticsProductionLogisticsExamples
Company
About usHistoryLocationGTCSales terms and delivery conditions
Deutsch  |  English
  • Parts for Commercial Vehicles
    • Hose tube containers
      • Silo vehicles
      • Tanker vehicles
      • Transportation tube for roof rack
    • Load-securing
      • Patrol cans and gas bottles
      • Transportation tube for roof rack
      • Belt retractor
      • Belt tray
    • Toolboxes
    • Platform boxes
    • Storage boxes
    • Special parts for silo vehicles
    • Air Suction Channels
    • Fire extinguisher box
    • Document box
    • Wheel chock
    • Wheel nut
    • Mudguards
    • Standard parts
    • Individual solutions
    • Installation instructions
    • Brochures as PDF
  • Products
    • Small silo
    • Robotic lawnmower garage
  • Individual parts
    • Design
    • Sample inspection
    • Toolmaking
    • Plastics
    • Production
      • Deep Drawing
      • Vacuum forming
      • Milling
      • Bending and welding
      • Assembly
    • Logistics
    • Examples
  • Company
    • About us
    • History
    • Location
    • GTC
    • Sales terms and delivery conditions
  • Contact
    • Enquiry
    • Direction
    • Legal notice